Experimental thermal performance of deionized water and iron oxide nanofluid for cold thermal storage.

Phase change materials enhance the thermal comfort of buildings by utilizing stored thermal energy. In large air-conditioning systems, ice storage plays a crucial role in managing peak power loads. This experimental study explores the freezing characteristics of deionized water containing suspended iron oxide nanoparticles in spherical containers for cold storage. The synthesized nanofluid phase change material (NFPCM) was investigated for its freezing behavior under surrounding fluid temperatures of - 2 °C and - 6 °C. The uniformity in charging of NFPCM is the unique feature prevalent in the first quarter of the charging, with 50% mass frozen observed. An increased surface heat flux of 200% was achieved using NFPCM at Tsurr = -6 °C. The chiller operational time is optimally reduced by 75% by considering twice the container design's phase change materials. Adding iron oxide nanoparticles and partial charging is suitable for uniform heat transfer for the shorter freezing duration in cooling applications. The novelty of the present study is that the proposed NFPCM nearly nullifies the subcooling effects of deionized water without using nucleating agents. This NFPCM appreciably enhances power competence, yielding large-scale air-conditioning systems' desired economic impact and sustainability. The reported results align with Sustainable Development Goals (7-Affordable and Clean Energy and 13-Climate Action).

Effect of active multi-walled carbon nanotubes (MWCNT) on the energy storage density of DI water for cool thermal storage system.

The present research work aims to investigate the energy saving aspects in cool thermal energy storage system (CTES) by improving the thermophysical properties of deionized (DI) water. The influence of phase change enthalpy, specific heat, thermal conductivity, and cooling rate of the DI water for the dispersion of chemically functionalized multi-walled carbon nanotubes (f-MWCNT) is studied experimentally. The covalent functionalization method is used to modify the surface of the multi-walled carbon nanotubes (MWCNT) with the use of concentrated nitric acid. The nanofluid phase change materials (PCMs) in different mass concentrations (0.25%, 0.50%, and 0.75%) were prepared by dispersions of the f-MWCNT in DI water. The minimum reduction in enthalpy (4.01%) was recorded for the nano-PCM with 0.75% f-MWCNT as compared to the base PCM with 0.5% of sodium dodecyl benzene-sulfonate (10%). The thermal conductivity enhancement of 53.15% and 28.2% was recorded in both states for the nano-PCM (with 0.75%) at the temperature of - 10 °C and 5 °C respectively. Also, the enhancement of 30% and 23% in cooling rate is recorded for the dispersion of maximum concentration of f-MWCNT at the HTF temperatures of - 8 °C and - 6 °C, respectively. It is proven from the above findings that the dispersion of f-MWCNT reduces the subcooling and facilitates the running of the CTES system at a higher operating temperature.